|
|
|
|
|
62-21600 Tombstone Taillight for FL Style Fender 1973/1998
|
These Tombstone Taillight Kits include a mount kit that will simplify installation on the FL style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models. 12 volt. Fits FL style rear fenders 1973/Later. Chrome Plated
|
|
$50.07 Moto's Price! $22.00
|
|
|
|
|
|
|
|
|
|
|
|
11211 Box Taillight Assembly for Custom Use
|
Moto's box type taillamp assembly has a chrome plated die cast housing with a flat back for easy mounting and is drilled and tapped for use with 5/16-18 mounting bolts on 2" centers. Taillamp measures 2" tall x 4 1/4" wide and is 2" thick. A clear license window is also provided. Includes a 12 volt bulb with approximately 8" of lead wire.
|
|
$24.50 Moto's Price! $18.95
|
|
|
|
|
|
|
|
|
|
|
|
11212 Maltese Cross Taillight Assembly for Custom Use
|
Moto say's that 6 foot tall sissy bars may not be the hottest look anymore, but the Maltese Cross Taillamp that used to adorn them is still a biker favorite. The sturdy die cast chrome plated housing has a flat back for easy mounting and includes 5/16" mounting bolts on 2" centers. Taillamp measures 4" tall x 4 1/8" wide and is 1 7/8" thick. A clear license window is also provided. 12 volt assemblies are available with an automotive #1157 bulb or with 53 separate LED lights.
|
|
$21.95 Moto's Price! $12.95
|
|
|
|
|
|
|
|
|
|
|
|
11201 Cateye Taillight for Custom Use
|
This Moto's Cateye Tailight is a bulb type, uses a standard automotive #1157. These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires. The flat back housing includes mounting studs on 2" centers. 12 volt. Chrome Plated
|
|
$18.50 Moto's Price! $14.50
|
|
|
|
|
|
|
|
|
|
|
|
11233 Skull Taillight Cateye for Custom Use
|
LED (Light Emitting Diode) Technology permits the use of the shallow housing (1" thick) for a whole new minimalist look.
Includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate.
Die cast housing features a four step design.
Flat backed housing for custom use mounts on 2" centers.
12 volt. Chrome plated.
|
|
$52.36 Moto's Price! $49.95
|
|
|
|
|
|
|
|
|
|
|
|
21640 Tailight/License Mount Kit
07-21640
|
These custom Taillamp and License Plate Mount Kits feature a choice of a standard duty custom steel license plate mount that positions the license plate further under the fender than OEM mounts or a heavy duty mount with slotted mounting holes for adjustment of angle. The 12 volt taillamp included fills the underneath contour of the fender, providing a true custom look. Fits Fat Bob rear fenders on Softails and Wide Glides 1980/Later
|
|
$49.95 Moto's Price! $38.95
|
|
|
|
|
|
|
|
|
|
|
|
11218 Custom Taillamp And Mount Kit For Fat Bob Fenders
|
These custom Taillamp and License Plate Mount Kits feature a choice of a standard duty custom steel license plate mount that positions the license plate further under the fender than OEM mounts or a heavy duty mount with slotted mounting holes for adjustment of angle. The 12 volt taillamp included fills the underneath contour of the fender, providing a true custom look. Fits Fat Bob rear fenders on Softails and Wide Glides 1980/Later as well as our 22004, 22009, and 22014 fenders.
Complete custom taillamp and mount kit for Fat Bob fenders. Chrome plated. Standard duty. Fits FXWG 1980/1999 and FXST 1980/1999. (Imported)
Retail List - $41.65 Your Price - $35.40 Wt - 1.75lbs.
|
|
$45.95 Moto's Price! $31.50
|
|
|
|
|
|
|
|
|
|
|
|
11210 Oem Style Taillamp Assembly And Accessories For Most Models
|
Available with your choice of the OE style incandescent dual contact bulb or with the updated LED (light emitting diode) type lights. The bulb type uses a standard 1157 style light bulb and the LED type uses 80 individual LED lights. LED lights are unaffected by moisture or vibration and do not produce voltage robbing heat. They are also known for their extreme life span and draw only 9 watts of power as opposed to the 29 watts of power that the OE style bulb uses. Both 12 volt taillight assemblies include approximately 5 feet of lead wire and mounting speed nuts. Fits Big Twin 1973/1998, Softail 1984/1999, and Sportster 1973/1998. Also fits side cars 1979/1998.
DOT Approved Bulb type. Fits Big Twin 1973/1993 and Sportster 1973/1993. (Imported)
|
|
$37.95 Moto's Price! $29.95
|
|
|
|
|
|
|
|
|
|
|
|
11225 12 Volt Led Taillights & Mounts
|
Moto's Light Emitting Diode (LED) Taillights are perfect for motorcycles. They are not affected by vibration or moisture, do not produce heat and have an unbelievable life span. They also have about half the wattage draw that the OE style incandescent bulbs draw.
Not DOT Approved LED Type. Fits Big Twin 1973/1993, Sportster 1973/1993, and Side Car 1979/1998.
|
|
$65.95 Moto's Price! $52.50
|
|
|
|
|
|
|
|
|
|
|
|
11792 Oem Style Taillamp Assembly And Accessories For Most Models
|
Available with your choice of the OE style incandescent dual contact bulb or with the updated LED (light emitting diode) type lights. The bulb type uses a standard 1157 style light bulb and the LED type uses 80 individual LED lights. LED lights are unaffected by moisture or vibration and do not produce voltage robbing heat. They are also known for their extreme life span and draw only 9 watts of power as opposed to the 29 watts of power that the OE style bulb uses. Both 12 volt taillight assemblies include approximately 5 feet of lead wire and mounting speed nuts. Fits Big Twin 1973/1998, Softail 1984/1999, and Sportster 1973/1998. Also fits side cars 1979/1998.
Taillamp accessory. Taillamp Lens with Blue Dot installed. Not DOT approved. Fits Big Twin 1973/1993 and Sportster 1973/1993.
|
|
$14.95 Moto's Price! $9.95
|
|
|
|
|
|
|
|
|
|
|
|
11728 Oem Style Taillamp Assembly And Accessories For Most Models
|
Available with your choice of the OE style incandescent dual contact bulb or with the updated LED (light emitting diode) type lights. The bulb type uses a standard 1157 style light bulb and the LED type uses 80 individual LED lights. LED lights are unaffected by moisture or vibration and do not produce voltage robbing heat. They are also known for their extreme life span and draw only 9 watts of power as opposed to the 29 watts of power that the OE style bulb uses. Both 12 volt taillight assemblies include approximately 5 feet of lead wire and mounting speed nuts. Fits Big Twin 1973/1998, Softail 1984/1999, and Sportster 1973/1998. Also fits side cars 1979/1998.
Red replacement Lens for 11210. DOT approved. Fits Big Twin 1973/1993 and Sportster 1973/1993.
|
|
$9.95 Moto's Price! $6.95
|
|
|
|
|
|
|
|
|
|
|
|
11801 Taillight, Turn Signal And Marker Light Bulbs For All Models
|
Standard dual element bult. 12 volt, 32/3 candle power. 1 1/8" globe length, 1" globe O.D., .600" base O.D. Clear. Sold in packages of 10. (Imported)
|
|
$5.95 Moto's Price! $3.95
|
|
|
|
|
|
|
|
|
|
|
|
11811 Taillight, Turn Signal And Marker Light Bulbs For All Models
|
Halogen dual element bulb. 12 volt, 50/15 wattage. 1" globe length, .580" globe O.D., .600" base O.D. Clear. (Imported)
|
|
$9.95 Moto's Price! $6.95
|
|
|
|
|
|
|
|
|
|
|
|
11726 Laydown Style Taillight Lens For Most Models
|
Internal facets to achieve smooth external face.
Laydown style matches contour of fender for custom look.
Reduced license illumination window.
Includes built in refector & mounting gasket.
Laydown style taillight lens. Fits Softail 2000/Early 2003 (except FXSTD & FLSTS), FLT, Dyna & Sportster 1999/Early 2003. (Imported)
|
|
$18.95 Moto's Price! $12.50
|
|
|
|
|
|
|
|
|
|
|
|
11727 Oe Style Taillight Lens For Most Models
|
Direct replacement for OE style taillight lens.
Includes built-in reflector & mounting gasket.
See elsewhere in this section for taillight bulbs.
Fits Softail 2000/Early 2003 (except FXSTD & FLSTS), FLT, Dyna & Sportster 1999/Early 2003. Replaces HD 68140-99.
|
|
$18.95 Moto's Price! $14.95
|
|
|
|
|
|
|
|
|
|
|
|
11770 Blue Dot Lens For Custom Use
|
Top quality multi faceted blue plastic dot with chrome mounting ring. Tabs bend for easy installation. Fits .915" through .968" hole. Has many custom applications. Chrome plated. Sold in packages of 4. (Imported)
|
|
$7.95 Moto's Price! $5.50
|
|
|
|
|
|
|
|
|
|
|
|
11206 Oe Style Taillamp Assembly 1955/1972 Models
|
Moto's Original style taillamp in chrome, with 12 volt bulb and approximately 46" of lead wire
Fits Big Twin 1955/1972, Sportster 1956/1972, and many custom applications.
Replaces HD# 68010-64B.
|
|
$24.95 Moto's Price! $17.50
|
|
|
|
|
|
|
|
|
|
|
|
11231 Diamond Taillight Assembly For Custom Use - LED
|
This LED diamond type taillight has a flat back housing with two 1/4" x 20 mounting studs spaced on 2" centers. Die cast housing with clear license window. 12 volt taillight with approximately 7 1/2" of lead wire. L 5 1/2" x W 2 3/4" x H 2 1/4".
LED 12 volt taillight. Chrome plated.
|
|
$59.95 Moto's Price! $47.50
|
|
|
|
|
|
|
|
|
|
|
|
11220 Small Cateye Taillamp/license Mounts For Custom Use
|
"EMGO" Chrome Plated
License plate mount is constructed from lightweight aluminum
Taillight is manufactured from ABS plastic
Taillight mounts on 2" centers, measures 6 1/2" long x 1 3/4" wide x 1 1/2" tall
License mount fits flat or curved fenders
License mount includes mounting gasket
19 LEDs used in taillight, 4 LEDs used for license plate light
12- volt applications
Includes mounting hardware
Note: These taillight assemblies are not DOT approved and should be used accordingly
Bulb-type Taillight & Aluminum License Mount Kit, (Imported)
|
|
$28.95 Moto's Price! $21.50
|
|
|
|
|
|
|
|
|
|
|
|
11214 Taillamp And License Mount Kit For Fxwg & Fxst
|
Steel license mount similar to the OE type, but designed for our custom taillight.
12 volt taillight fits snugly under the Fat Bob rear fenders for a matching contour.
Can also be used for custom applications when used with our 22004, 22009 or our 22014 7" wide Fat Bob rear fenders.
Taillamp and license plate mount kit with dual contact bulb. Fits FXWG & FXST models 1980/1999. Chrome plated. (Imported)
|
|
$55.95 Moto's Price! $41.50
|
|
|
|
|
|
|
|
|
|
|
|
19921 Custom Taillamp And Mount Kit For Fat Bob Fenders
|
These custom Taillamp and License Plate Mount Kits feature a choice of a standard duty custom steel license plate mount that positions the license plate further under the fender than OEM mounts or a heavy duty mount with slotted mounting holes for adjustment of angle. The 12 volt taillamp included fills the underneath contour of the fender, providing a true custom look. Fits Fat Bob rear fenders on Softails and Wide Glides 1980/Later as well as our 22004, 22009, and 22014 fenders.
Complete custom taillamp and mount kit for Fat Bob fenders. Heavy duty. Fits Softail 198/Later, FXST 1980/Later, and FXWG 1980/Later. (Imported)
|
|
$49.95 Moto's Price! $39.95
|
|
|
|
|
|
|
|
|
|
|
|
11741 Beehive Taillamp Assembly For 1939/1946 Models
|
Beehive style Taillight features quality chrome plating and many universal mounting applications. Taillight assembly is complete with 12 volt bulb, rubber gasket for mounting and chrome plated license bracket. This replica of the Harley-Davidson taillight fits many stock models 1939/1946.
Red Taillight lens (plastic).
|
|
$0.00
|
|
|
|
|
|
|
|
|
|
|
|
11209 Tombstone Taillamp Assembly For 1947/1954 Models
|
Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included. Fits Big Twin models 1947/1954 and custom applications. Chrome Plated
Bulb type Tombstone Taillight Assembly only. Fits Big Twin 1947/1954. (Imported)
|
|
$37.95 Moto's Price! $37.50
|
|
|
|
|
|
|
|
|
|
|
|
11505 Taillamp Visor For 1973/later Taillamp
|
Chrome Plated stamped steel taillamp visor with license lens cutout
Fits Harley-Davidson taillamp 1973/Later (Except FXSTD & FLSTS) as shown and our 11210 taillamp, taillamp not included
Replaces HD# 68006-83T.
|
|
$12.95 Moto's Price! $10.50
|
|
|
|
|
|
|
|
|
|
|
|
11526 "KURYAKYN" Custom Taillamp Visor For 1973/later Taillamp
|
"KURYAKYN" Made from a space age tough molded plastic, this gem is super light. The styling is really unique with its 3 slot like openings on top incorporated with a modern flowing design of lines and curves. Beautifully chrome plated and made in the U.S.A. Installation is a snap using the existing lens mounting screws. U.S. Patent # DES 347,907. Fits Big Twin and Sportster with 1973/Later style taillamp (except models with FXST and FXWG style rear fender).
|
|
$26.95 Moto's Price! $20.50
|
|
|
|
|
|
|
|
|
|
|
|
11239 Tear Drop Taillight/license Mount For Custom
|
Vintage 1930's styling with today's quality manufacturing.
Die cast construction for strength and durability and show chrome plated.
Contoured backing with thick molded rubber gasket for smooth custom fenders.
Housing measures 6" long x 2 3/4" wide.
The taillight lens meausres 2 1/2" long x 1 1/2" wide.
Includes license plate illumination lens.
Complete with mounting hardware.
Designed for 12 volt bulbs.
Tear drop taillight/license mount. (Imported)
|
|
$39.95 Moto's Price! $22.50
|
|
|
|
|
|
|
|
|
|
|
|
62-21510 Lucas Tailight Assembly
|
aftermarket English-style brushed aluminum taillight ( tail light ) assembly, a Lucas-style replica that is for many British motorcycles such as BSA, Triumph, Norton, Royal Enfield, as well as JAWA motorcycles. This is exactly the same unit as we have available in chrome, but it is in aluminum for a more subtle vintage look. This Assembly is complete with everything you need to mount the taillight, including a rubber gasket / vibration damper and bolts / nuts. The height of the taillight curve ( where it mounts to the rear fender) is approximately 3.5 inches ( 8.9cm ) and the twin lower mounting holes are approximately 1.25 inches ( 3.2 cm ) apart. The total length of the assembly from the top of the mount to the face of the lens is 5.5 inches ( 14 cm ) and the lens is approximately 4 1/8 inches wide, 2 inches tall, and 1 7/8 inches deep at the top of the lens ( 10.5 / 5 / 4.75 cm ). The included single bulb mount is a two-wire assembly for a single element bulb. This is a great part to put on your vintage or custom motorcycle!
|
|
$45.95 Moto's Price! $35.50
|
|
|
|
|
|
|
